Q&A – ADDITIONAL INFORMATION
Easy Clean vs Conventional Cleaners
Easy Clean is an organic environmentally friendly product that targets light rust on any metal and Tea Staining on Stainless Steel. As opposed to most harsh acidic and caustic cleaning chemicals, Easy Clean is safe to use in all environments.
Easy Clean vs Polishes
Easy Clean is designed to remove light rust and tea staining without the use of abrasives used within polishes. It is also better at getting into and cleaning tight areas. Once the item is clean then apply polish or our Easy Shield to protect the surface.
What is the best way to apply the Easy Clean?
Depending on the item being cleaned, we generally use a brush for tight areas like stainless turnbuckles and a kitchen sponge for straight runs. Apply a thin uniform coating, let it sit for 5-10 minutes and then wash it off with water. For heavier stains let the product sit for 10-20 minutes then gently rub along the grain (for stainless steel).
What Surfaces do Easy Clean work on?
Easy Clean is designed to remove tea staining and light rust from Stainless steel and chrome but is also excellent for removing rust stains from the Gel Coat on Boats, most non-porous surfaces, ceramics and porcelain. We recommend testing a small inconspicuous area before cleaning the whole item. If the rust has been baked on by the sun or there for some time I would recommend the Rusted Solutions Rust Remover Gel
How long does the Easy Clean take to do the job?
Light rust can be removed instantly. If this is not the case leave the Easy Clean on for 5-10 minutes then wash the surface with water. Should there be no change to the surface there is either a barrier in the way or our Rust Remover Gel may be required.
What do I do when the item is clean?
Wash the item with water and dry it. The end protective coating depends on the item being cleaned. For Chrome and Stainless Steel we recommend our Easy Shield Product.