ShieldTeaStainingDULLINGShieldAUSSIE CONDITIONSShieldWAXBASEWatercleanup

Easy Shield is a protective coating for Stainless Steel, Chrome, Aluminium & Brass. 

It is so simple to use as you just wipe it, wait a minute and lightly rub off the excess for Chrome & Stainless. Aluminium requires a bit of elbow grease but you will get an outstanding result.

Used by hundreds of local Councils, Theme parks, Zoos, Stadiums Australia Wide.

This alternative to traditional polishes will amaze you.

Application

Remove Contaminents

We recommend our Easy Clean product for Stainless & Chrome prior to application of the Easy Shield. (Easy Clean is not for use with aluminium)

Apply

Rub the Easy Shield into the surface with a clean cloth and wait for it to cloud.

Light Rub

Give it a light rub over with a clean cloth and your done.

Q&A – ADDITIONAL INFORMATION 

What surfaces does Easy Shield protect? Easy Shield can be used on Stainless Steel, Chrome, Polished Brass and Aluminium.

Will the Easy Shield remove oxidation off aluminium? Yes and it will also make it shine again. There is a bit of elbow grease required but its well worth it for the end result. It will not dull the ally like the acid cleaners.

What is the coverage of a 250ml Bottle? On average around 20m2.

Easy Shield vs. Polishes. Easy Shield is designed to protect Stainless Steel and Chrome without the use of harsh abrasives used within polishes. It is also better at getting into and protecting tight areas where buffing with a conventional polish would be impossible.

Easy Shield vs. Stainless Steel Cleaners. Easy application would be the first benefit as it’s a simple wipe on and wipe off without the hard buffing (hard buffing required for oxidised ally). You also do not get black hands as it doesn’t contain hydro-carbon solvents.

What is the best way to apply the Easy Shield? Depends on the item being coated. We generally use a paint brush for tight areas like stainless turnbuckles. Apply a thin uniform coating, allow the product to cloud then rub over with a clean cloth. For larger flat surfaces a cloth is fine for application. Again apply a thin coating and let is cloud and rub off with a clean cloth. For stainless steel please rub along the grain.

How long does Easy Shield Last? Depends on the environment it is being used in. We recommend re-application after 6-9 months. This time is based on a yacht that had all stainless and chrome treated It is moored in a salt water environment and fully exposed to the weather. It was reapplied before any signs of deterioration to avoid having to start the cleaning process again.

How long is the shelf life? The product has no shelf life as long as the lid is kept tightly closed.

What preparation is required before using the Easy Shield?  Make sure the surface is clean, free from other products and dry before application. Do not apply to hot metal.

Click here for safety data sheet Easy Shield – SDS

WASH RUST AWAY WITH RUST REMOVER SOAK GENTLY REMOVE RUST FROM CHROME REMOVE RUST FROM FUEL TANKS RESTORE ANTIQUES AND GET INTO TIGHT MECHANISMS GET INTO TIGHT MECHANISMS & HARD TO ACCESS AREAS REMOVE HEAVY TEA STAINING REMOVE RUST FROM BIKES CLEAN UP RUSTY TOOLS REMOVE RUST FROM CAR PARTS REMOVE HEAVY RUST & SCALE REMOVE RUST FROM GEL COAT & FIBREGLASS TAKE THE ELBOW GREASE OUT OF CLEANING BRASS GENTLY REMOVE RUST FROM CHROME